Self-leveling polyaspartic paint with polyaspartic elastomer, SurfaDurTM F, Nanophos

Self-leveling and easy application.
Extended working time: (45min at 25oC – 77oF) for easy application.
Fast turnaround (<24h) for timely project delivery.
100% solid coating formulations.
Low roughness for minimal dirt absorption and long-term UV stability performance.
Minimum lifespan: 15 years.

Color: Gray

Amount 2-ol 5L

Regular price: €500,00
Regular price: ~~€2.950,00~~
Sale price: €500,00

1x PIECE

Color: Gray , Amount: 2-ol

Add to cart

Practical Advice

*Working timefor SurfaDur F Floor is 45 minutes at 25°C. Avoid covering the expansion joints of the floor. After SurfaDur F Floor has hardened, apply a “flexible” polyurethane sealant to the expansion joints. Spreading rate: 2-3 m2/L, per coat.

100% Surface Protection or Your Money Back!

Free 2 day shipping from €150

Description

SurfaDur F is a self-leveling polyaspartic paint with an innovative, monolithic, fully bonded, self-leveling coating formula, suitable for the most demanding floor applications. Created based on proprietary modified polyaspartic technology, it is a high-strength formula (100% solids – solvent-free).

All surfaces must be clean, dry and free of dust, oil, grease, loose materials and contamination.
The substrate temperature should not exceed 30oC (86oF) and the moisture content of the substrate should not exceed 15%, otherwise the curing time values may decrease.
Use SurfaPaint Epoxy WB as a surface primer for optimal adhesion. SurfaPaint Epoxy WB can be applied by roller, brush or spray in a single coat at a consumption rate of 10 sq m.

Along the edges of a floor with vertical elements (parapet, stairwell end, etc.), pipe joints, ventilation joints, joints of metal elements, joints between metal sheets or panels, screws or joints on the support (wider than 1 mm) must be sealed with a polyurethane sealant, 24 hours after applying the epoxy primer.
Allow 24 hours of curing after applying SurfaPaint Epoxy WB or polyurethane sealant before applying SurfaDur F.

Therefore, all applied volume is converted into dry film thickness, increasing the cost efficiency of the application. The main structure of the modified polyaspartic component formulation provides extreme tensile strength values, combined with exceptional elasticity and adhesion strength to the substrate.
SurfaDur F exhibits unique resistance to harsh weather conditions, even under puddles or with high UV irradiation values.
While SurfaDur F cures quickly (<24h), it allows for an extended working time (45min at 25oC – 77oF) for easy application.

After curing, the resulting monolithic membrane becomes a seamless water and vapor/gas barrier.

SurfaDur F is highly recommended for heavy traffic platform systems (ramps, parking lots, parking areas), walkways, roof decks and industrial floors.

Also ideal for cold storage, laboratories, hospitals, food and beverage factories, kitchens, IT and computer facilities, dairies, warehouses, factories and hangars.

Application Instructions

*Recommended to apply Primer Epoxy preventively at least 12 hours before applying Surfadur to reduce the paint consumption rate and increase adhesion.
*Always mix Hardener B into Base A. Use a suitable container, mixing paddle and/or drill for thorough mixing. Continue mixing for one minute after Hardener B has been added to Base A. Make sure the mixing paddle reaches all parts of the mixing container. If necessary, transfer the mixed materials to a new container for easier roller application.
*Application tools: brush, roller, sprayer. Roller application: A short-bristle, microfiber or thin-resistant roller provides an extremely smooth application. Do not use foam rollers. Start by painting the perimeter edges with the brush and avoid.
*Apply the mixed product in two or three coats, but avoid excessive rolling. Then apply in a crisscross motion. Use 10 cm wide fiberglass tape along joints or cracks larger than 1.5 mm. It is best to spread the amount before SurfaDur F Floor starts to harden, so it is best to work in sections.
*Broadcast Application: After applying SurfaDur F Floor and while the material is still wet, hand spread quartz in a “raindrop” pattern into the wet resin until completely covered. No resin or “wet” areas should be visible. Once SurfaDur F Floor has cured, remove excess quartz using a vacuum cleaner or broom. A second coat of SurfaDur F Floor can be applied when a smoother surface texture is desired.