Epoxy Garage Flooring Kit – Primer and Paint 6 KG | Resistance and Protection

Excellent resistance to water, alkalis and chemicals;
Excellent adhesion to concrete and metal surfaces;
Ideal for high traffic areas;
Excellent resistance to mechanical stress.

Color: White

1x

Regular price: €130,00
Regular price: ~~€950,00~~
Sale price: €130,00

1x PIECE

Color: White

Add to cart

2x

SAVE 5%

€260,00

SAVE 5%

2-5

Color: White

The most selected

Add to cart

6x

SAVE 12%

€780,00

SAVE 12%

6+

Color: White

Just to be sure

Add to cart

Practical Advice

100% Surface Protection or Your Money Back!

Free 2 day shipping from €150

Privacy policy Refund policy Terms of service Shipping policy Legal notice Contact information

TECHNICAL DETAILS:

PAINT coverage rate: 4-6 sq m/L/coat, depending on the absorbency of the surface. The paint is applied in 2 coats. PAINT coverage rate: 4-6 sq m/L/coat, depending on the absorbency of the surface. The paint is applied in 2 coats.

PRIMER coverage rate: 8-10 sq m/L/layer. PRIMER coverage rate: 8-10 sq m/L/layer.

The consumption rate of the KIT is up to 20 sq m in 2 layers depending on the degree of absorption of the material. The consumption rate of the KIT is up to 20 sq m in 2 layers depending on the degree of absorption of the material.

Description

GARAGE KIT, PRIMER+EPOXIDE PAINT

SurfaPaint ™ Floor Epoxy Enamel epoxy paint is a two-component product, ideal for HOME USE specialized for GARAGE but also warehouses, workshops, department stores, water tanks or even industrial floors.

The primer is ideal for GARAGES, INTENSE TRAFFIC AREAS, FLOORS exposed to large temperature variations, having high mechanical resistance and improved slip resistance properties.

PRIMER AND PAINT are easy to apply, leaving a semi-gloss finish, resistant to abrasion and impact, without visible welds, suitable for CONCRETE , STEEL , NON-FERROUS METALS.

Application Instructions

SURFACE PREPARATION:
Ensure the surface is clean, free of dust, oils, grease or loose residue. New cement or masonry substrates must be cured for at least 4 weeks before application.
Repair damaged areas, cracks or holes with the MONTO CRACK REPAIR KIT.
PRIMER APPLICATION:
Always pour the entire amount of Hardener B into Base A and mix thoroughly for 3 minutes using a mixer or low speed drill. Mixing should be done on both the walls and bottom of the container for proper homogenization.
Apply the primer with a roller to the surface and let it dry for 8 hours.
Optionally, the primer can be diluted with NanoPhos Thinner A solvent (5-25% v/v), depending on the application, desired workability and substrate absorption.
PAINT APPLICATION:
Pour component B into component A and mix thoroughly for 3 minutes using a low speed drill. Mixing should be done on both the walls and bottom of the container for proper homogenization.
Then, if necessary, dilute with NanoPhos Thinner A solvent (5-10%v/v) depending on the application, desired workability and substrate absorption.
Apply with a roller, brush or airless spray.
After applying and waiting for the PRIMER to dry for 8 hours, apply the two coats of PAINT, both 8 hours apart.
Reapplication time should not exceed 2 days. These intervals may vary depending on relative humidity and ambient temperature. All tools and equipment should be cleaned immediately after use with NanoPhos Thinner A.

Note this:

Not recommended for damp surfaces or surfaces with active capillary moisture
Not suitable for direct application on floors not previously primed
Do not apply at temperatures below +10°C or above +30°C.
Working time is limited after mixing the components
Not intended for heavy industrial traffic without additional protection
Requires protective equipment and application in a ventilated space
Cannot be applied to previously painted surfaces without sanding and compatibility test