• Two-component epoxy paint, for swimming pools, solvent-based, SurfaPaint Epoxy Enamel, Nanophos 5L
  • Two-component epoxy paint, for swimming pools, solvent-based, SurfaPaint Epoxy Enamel, Nanophos 5L
1 3

NanoMax PRODUCT CODE: TEST1

  • In stock

Two-component epoxy paint, for swimming pools, solvent-based, SurfaPaint Epoxy Enamel, Nanophos 5L

  • Ideal for concrete and polyester substrates
  • Excellent resistance to water, chlorinated compounds, alkalis, diluted acids, and mineral oils
  • Outstanding substrate adhesion
  • Ideal for wide temperature variations
  • Very good penetration capability due to its balanced composition
  • Impeccable glossy finish
1x
€96,80
€200,00
€96,80
1x PIECE
Add to cart

Practical Advice

Before applying SurfaPaint™ Epoxy Enamel, ensure that the surface is clean, dry, and free from dust, grease, or any loose materials. Proper surface preparation significantly enhances adhesion and overall performance. The two components should be mixed thoroughly, following the specified ratio, until a uniform mixture is achieved.

100% Surface Protection or Your Money Back!

American Express Apple Pay Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa
Privacy policyRefund policyTerms of serviceShipping policyLegal noticeContact information

TECHNICAL DETAILS:

COVERAGE 8–10 m²/L, 2 coats recommended

Description

SurfaPaint™ Two-Component Epoxy Paint is a solvent-based, two-component epoxy coating.
It is specially designed for the protection of swimming pools, fountains, and water tanks. It offers excellent resistance to both fresh and salt water, chlorination products, acids, alkalis, and sunscreen oils.

Thanks to its two-component composition, it forms a strong yet flexible film that performs exceptionally well against surface contraction and expansion, high temperatures, and abrasion, helping to maintain color stability over time.

It is self-priming and exhibits strong adhesion to concrete or cement mortar surfaces. It is suitable for both new and previously painted pools.

SurfaPaint™ Pool Epoxy Enamel is an epoxy coating intended for use on cementitious substrates such as pools, tanks, and fountains, where high impact and/or friction loads are present.

Application Instructions

  • Налейте компонент B в компонент A и разбъркайте добре в продължение на 3 минути с миксер на ниска скорост.
  • За правилно смесване е необходимо да се разбърква както по стените, така и по дъното на съда.
  • След това, ако е необходимо, разредете с разредителя NanoPhos Thinner A (5-10% v/v) в зависимост от приложението, желаната работна консистенция и абсорбцията на субстрата.
  • Нанесете с валяк, четка или безвоздушен пръскач. SurfaPaint™ Pool Epoxy Enamel изсъхва повърхностно за 2-3 часа и може да се пребоядисва след 12 часа.
  • Времето на капелна терапия не трябва да надвишава 2 дни.
  • Басейнът може да се напълни с вода 7 дни след боядисване, когато боя се е изсъшила напълно.
Note

Note this:

Do not apply towet, dusty or contaminated surfaces with oil, grease or de-icing salts.
Not compatible withold oil-based paints, varnishes alkyd or glossy substrates, without prior stripping.
Not recommended for application attemperatures below +10°C or above +30°Cor in environments with relative humidity >85%.
Not to be applied onconcrete fresh(under 28 days) or on surfaces with humidity >4%.The time of use of the mixture is limited (30–40 min)– the product must be applied immediately after mixing.
Not intended forelastic, flexible or vibration-exposed surfaces strong.

File Technical sheet File Security sheet
arrow

100% Surface Protection or Your Money Back!

Free 2 day shipping from €150